maxAI™ 700 CAN bus dsplay

maxAI 700

Our Most Powerful Display Yet

maximatecc's most advanced engine monitoring system allows you to fully customize your display to suit your application. The maxAI 430 is available in four models to fully integrate with your vehicle. The vibrant 4.30" TFT display provides the highest quality visuals to optimize performance and efficiency.

maximatecc now offers Qt for MCU compatibility.

Specifications

Below you find an overview specification of the maxAI™ 700 series. The same information is found in the product leaflet which is available for download and in printed form. Please note that product information may change over time and the latest and correct information is always found on this website. You find additional information in the technical manual and software manuals.

 

PROCESSING
Main ProcessorMicro-controller based on ARM® Cortex®-M7 32-bit
Internal Memory1MB RAM, 2MB Flash
External Memory2MB SDRAM, 16MB Flash, 64KB EEPROM
DISPLAY
TypeIndustrial Grade Premium TFT
Size & Resolution7'' diagonal, 800x480, 80/80/80/80
Color Depth24-bit RGB
Contrast Ratio1000:1
Brightness800 NITS
Dimming10-100% manually controlled via input device
SOFTWARE
Operating SystemOptimized FreeRTOS based on MIT’s open source standard
Application SoftwareFreely programmable toolchains, primarily programmed via GNU C/C++ and supports application modules and library additions, JTAG/serial wire debugging
INTERFACES
CAN2 CAN, J1939, standard 250 kbps or 500 kbps
USBUSB 2.0 slave (Boot loader and SW configuration support)
Power Supply12 and 24 volt systems, 9-32 VDC
Connectors1 Deutsch DT06-08SA connector, 1 Deutsch DT06-6S connector
Warning Lights1 warning light indicator (amber and red)
Input5 configurable inputs: voltage, resistance, frequency and digital, one 4-20mA current input
Output1 config. output, low-side mode up to 1A, high-side mode up to .5A
ENVIRONMENT
IP ClassIP67 (front) & IP66 (rear with connectors)
EMS ConformityISO 13766 (emissions) SAE J1113-21 (immunity)
SAE StandardVibration, UV, salt spray and chemical compatibility
Temperature Range-20 to 70°C (operational) , -30 to 85°C (storage)
CASING
Housing MaterialBlack PC/ABS Plastic, UV Resistant
Cover LensGlass. Optically bonded 1.8mm cover glass with AG treatment
Mechanical InstallationFlush/Panel Mounting
W x H x D (mm)201x130.5x42
Weight (oz/g)TBD

Configuration is integral to maximatecc products. Learn more about our other products:

CAN Bus