maxAI™ 200

Compact and Configurable

The maxAI 200 is a simple but highly configurable display. Complimentary to our full CAN bus and DDBI portfolio, the maxAI 200 offers up to 50 different parameters for full customization and flexibility.


Below you find an overview specification of the maxAI™ 200. The same information is found in the product leaflet which is available for download and in printed form. Please note that product information may change over time and the latest and correct information is always found on this website. You find additional information in the technical manual and software manuals.

Download Specification


Main ProcessorMicro-controller based on ARM® Cortex®-M3 32-bit
Internal Memory64KB RAM, 512KB Flash
External Memory64KB EEPROM
TypeLCD (amber back light)
Size & Resolution2.0" diagonal, 128 x 96 pixels
Color Depth1-bit monochrome
Application SoftwaremaxAI™ Developed, Configurable on Device
Keypad4-button keypad, can be used to navigate parameters or select menu items
CANOne CAN, J1939, 250 or 500 kbps baud rate available
Power Supply12 or 24 volt nominal systems, 9-32 VDC
Connectors2 x 6-pin Deutsch DT Series Connectors
Warning Lights2 dead-fronted LED status indicators (amber & red)
Input4 configurable inputs for resistive or voltage output senders, or digital inputs
Output2 Digital Outputs (low/high side drivers)
IP ClassIP67 (front)
EMS ConformityISO 13766 (emissions) SAE J1113-21 (immunity)
SAE StandardVibration, UV, salt spray and chemical compatibility
Temperature Range-30 to 85°C (operational), -55 to 85°C (storage)
Housing MaterialBlack Engineered Resin, UV Resistant
Cover LensTempered Glass
Mechanical InstallationFlush/Panel Mounting
W x H x D (in/mm)3.77/95 x 3.77/95 x 2.72/69
Weight (oz/g)0.32 oz/9 g
Back to top of page

Configuration is integral to maximatecc products. Learn more about our other products: