maxAI™ 430 Technical Resources

Our Most Powerful Display Yet

maximatecc's most advanced engine monitoring system allows you to fully customize your display to suit your application. The maxAI 430 is available in four models to fully integrate with your vehicle. The vibrant 4.30" TFT display provides the highest quality visuals to optimize performance and efficiency.

Specifications

Below you find an overview specification of the maxAI™ 430 series. The same information is found in the product leaflet which is available for download and in printed form. Please note that product information may change over time and the latest and correct information is always found on this website. You find additional information in the technical manual and software manuals.

Download Specification

 

PROCESSING
Main ProcessorMicro-controller based on ARM® Cortex®-M7 32-bit
Internal Memory1MB RAM, 2MB Flash
External Memory2MB SDRAM, 16MB Flash, 64KB EEPROM
DISPLAY
TypePremium TFT
Size & Resolution4.3” diagonal, 480x272 px, 75x75x75 multi-viewing angle
Color Depth24-bit RGB
Contrast Ratio500:1
Brightness800 NITS
Dimming10-100% manually controlled via keypad
SOFTWARE
Operating SystemFree RTOS
Application SoftwaremaxAI Configurator, maxAI Design Studio
HMI
Keypad4 button keypad: navigate/select menu items
INTERFACES
CAN2 CAN, J1939, standard 250 kbps or 500 kbps
USBUSB 2.0 slave (Boot loader and SW configuration support)
Bluetooth430v, 430iv only: Bluetooth 4.2 (SW configiguration support)
Video Input1 analog PAL/NTSC (rear backup camera)
Power Supply12 and 24 volt systems, 9-32 VDC
Connectors1 Deutsch DT06-08SA connector, 1 Deutsch DT06-6S connector
Warning Lights1 warning light indicator (amber and red)
Warning Icons430 & 430v: 21 on-screen icons
430i & 430iv: 20 LED warning lights, black dead front
Input5 configurable inputs: voltage, resistance, frequency and digital, one 4-20mA current input
Output1 config. output, low-side mode up to 1A, high-side mode up to .5A
ENVIRONMENT
IP ClassIP67 (front) & IP66 (rear with connectors)
EMS ConformityISO 13766 (emissions) SAE J1113-21 (immunity)
SAE StandardVibration, UV, salt spray and chemical compatibility
Temperature Range-20 to 70°C (operational) , -30 to 85°C (storage)
CASING
Housing MaterialBlack PC/ABS Plastic, UV Resistant
Cover LensPolycarbonate with anti-scratch and anti-fog treatment
Mechanical InstallationFlush/Panel Mounting
W x H x D (in/mm)430, 430v: 5.162 (131.11) x 4.29 (108.97) x 1.63 (41.33);
430i, 430iv: 5.940 (150.88) x 4.54 (115.32) x 1.63 (41.33)
Weight (oz/g)430, 430v: 9.8oz/277g; 430i, 430iv: 10.5oz/293g
Back to top of page

Documentation
Downloads

Configuration is integral to maximatecc products. Learn more about our other products:

mm_gauge_collage_080822